- sales@directionplus.com.au
- Melbourne, VIC, Australia
- 1800 037 587
\ Shop \
PRODUCT SEARCH
Roadsafe Rated Recovery Tow Points VW Amarok (RPAMA01)
Interest free for up to 6 months with 
LEARN MORE
Total: $475.00
This item: Roadsafe Rated Recovery Tow Points VW Amarok (RPAMA01)
$475.00
$475.00
BUNDLE & SAVE
Original price was: $39.00.$35.10Current price is: $35.10.
Original price was: $81.00.$72.90Current price is: $72.90.
Interest free for up to 6 months with 
learn more
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- VW Amarok 2009-2017
- Not Suited for V6 Models
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
Additional information
| Weight | 15 kg |
|---|---|
| Brand | Roadsafe |
| Make | Model | Year | Engine |
|---|---|---|---|
| Make | Model | Year | Engine |
| Volkswagen | Amarok | 2010 | |
| Volkswagen | Amarok | 2011 - 2017 | CDBA (2.0L 4cyl) |
Related products
-
Rated Recovery Tow PointsRoadsafe Rated Recovery Tow Points RG Colorado/ Colorado7/ Trailblazer/ D-max/ MU-X (RPCOL02V3)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
Roadsafe Rated Recovery Tow Points for RG Colorado, Colorado7, Trailblazer, D-Max & MU-X (RPCOL02V3)
Product Overview
The Roadsafe Rated Recovery Tow Points are designed for the Holden RG Colorado, Colorado 7, Trailblazer (2012 – 2020), and Isuzu D-Max/MU-X (2012 – 2020). These recovery points provide ultimate reliability and performance for off-road recoveries, ensuring your vehicle is prepared for any situation.
Key Features
-
Vehicle Fitment: Fits Holden RG Colorado, Colorado 7, Trailblazer (2012 – 2020), and Isuzu D-Max/MU-X (2012 – 2020).
-
Rated and Tested: FEA-tested during design and destruction-tested to establish working load limits.
-
Matched Pair: Supplied as left-hand (LH) and right-hand (RH) for precise vehicle-specific fitment.
-
Secure Installation: Includes high tensile bolts and vehicle-specific mounting hardware for secure fitment.
-
Fitment Instructions: Clear, detailed instructions included for correct installation.
Installation Instructions
For optimal performance, follow the vehicle-specific instructions provided with your purchase. Correct fitment ensures the recovery points operate at their maximum working load limit (WLL).
Important: Always use the recovery points as a matched pair with an equalising bridle. Using a single recovery point with a side load or pull can damage the points and void your warranty.
Installation Tips
-
Professional Fitting Recommended: To ensure proper installation, we recommend fitting the recovery points with the help of a qualified mechanic who has expertise in 4WD vehicles. This ensures the points are installed based on your vehicle’s specific setup, including weight distribution, Bull Bar style, and intended usage.
-
Chassis Compatibility: These recovery points are designed for vehicles without bull bars. If your vehicle is fitted with a bull bar, modifications may be required. This might include adjustments to the bull bar bracket or adding longer bolts.
Bull Bar Compatibility
If your vehicle has a bull bar, the mounting bolts may conflict with the chassis holes needed for the recovery points. In most cases, a solution is available, but in some situations, major modifications may be necessary.
We maintain a list of compatible bull bars, available [here]. If additional hardware, such as longer bolts, is needed, they can be purchased locally. Due to the variety of bull bar combinations, we cannot include every possible bolt in the kit.
Make sure to use grade 8.8 or higher bolts and tighten them to the correct torque specifications.
Performance and Use
-
Straight-Line Pulls: These recovery points are designed for straight-line recoveries and are tested to handle the forces involved.
-
Not for Lifting: These recovery points are not intended for lifting purposes. Lifting requires different forces, which could compromise the recovery points.
Important Notes
-
Warranty: The warranty covers defects in the recovery points. However, incorrect installation, misuse, or improper selection may void the warranty.
-
Chassis Suitability: The chassis must be capable of handling recovery forces. The recovery points are tested for strength, but it is your responsibility to ensure the chassis can accommodate them safely.
(0 reviews) -
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points PJ-PK RANGER / BT-50 (RPRAN01)
Roadsafe Rated Recovery Tow Points for Ford Ranger & Mazda BT-50 (RPRAN01)
Product Overview
The Roadsafe Rated Recovery Tow Points are designed for the Ford Ranger (2007 – 2011) and Mazda BT-50 (2007 – 2011). These recovery points have been rigorously tested to provide superior strength and reliability for off-road recoveries. Ensure your vehicle is prepared for anything with these high-performance tow points.
Key Features
-
Vehicle Fitment: Fits Ford Ranger (2007 – 2011) and Mazda BT-50 (2007 – 2011).
-
Rated and Tested: FEA-tested during design and destruction-tested to determine working load limits.
-
Matched Pair: Supplied as left-hand (LH) and right-hand (RH) for precise vehicle-specific fitment.
-
Secure Installation: Includes high tensile bolts and vehicle-specific mounting hardware.
-
Fitment Instructions: Easy-to-follow instructions provided to ensure correct installation.
Installation Instructions
Follow the provided vehicle-specific instructions to ensure the recovery points are installed correctly, allowing them to perform at their maximum working load limit (WLL).
Important: Always use the recovery points as a matched pair with an equalising bridle. Using a single recovery point with a side load or pull may damage the points and void your warranty.
Installation Tips
-
Professional Fitting Recommended: For optimal results, we recommend fitting the recovery points with the help of a qualified mechanic who has expertise in 4WD vehicles. This ensures proper installation based on your vehicle’s weight distribution, Bull Bar style, and usage.
-
Chassis Compatibility: These recovery points are designed for vehicles without bull bars. If your vehicle has a bull bar, modifications may be needed, such as adjusting the bull bar bracket or using longer bolts.
Bull Bar Compatibility
For vehicles with bull bars, the mounting bolts may interfere with the required chassis holes for the recovery points. While most issues can be resolved, some situations may require significant modifications.
We maintain a list of compatible bull bars, available [here]. If additional hardware, like longer bolts, is needed, they can be purchased locally. Due to the variety of bull bar combinations, we cannot include every possible bolt in the kit.
Ensure that grade 8.8 or higher bolts are used and tightened to the correct torque specifications.
Performance and Use
-
Straight-Line Pulls: These recovery points are designed for straight-line recoveries and are tested to handle the forces involved.
-
Not for Lifting: These recovery points are not intended for lifting purposes. Lifting requires different forces that could compromise the integrity of the recovery points.
Important Notes
-
Warranty: The warranty covers defects in the recovery points. However, improper installation, misuse, or incorrect selection can void the warranty.
-
Chassis Suitability: The chassis must be designed to handle the recovery forces. The recovery points themselves are tested for strength, but it is the vehicle owner’s responsibility to ensure the chassis can accommodate them safely.
https://roadsafe.com.au/products/rated-recovery-tow-point-ford-compatible/rpran01
(0 reviews) -
-
Tyre & Repair
Direction Plus : Tyre Repair Kit (DPTRK)
The Direction-Plus™ Tyre Repair Kit is an essential tool for any 4WDer. Easy to use and store the Direction-Plus™ Tyre Repair Kit allows you fix punctures in tubeless tyres, as well as repair or replace broken tyre valves with new parts.
Packed in a protective case, the Tyre Repair Kit will fit easily under your 4WD’s seats or in rear storage.
kit contents:
-
- Zinc-Alloy T-handle Tire Seal Insertion Tool
- Zinc-Alloy T-handle Spiral Probe Tool
- Spare Insertion Needle
- 200mm Self-vulcanization Plugs
- Standard Plastic Valve Caps
- Standard Valve Cores
- 4 ways Valve Stem Tool
- Tire Pressure Gauge (10-120psi)
- Long Nose Pliers
- L-type Hex Tools
- Lube
- Knife
(0 reviews)
