- sales@directionplus.com.au
- Melbourne, VIC, Australia
- 1800 037 587
PRODUCT SEARCH
Roadsafe Recovery Bag Only (SB625)
This item: Roadsafe Recovery Bag Only (SB625)
$36.00
$36.00
BUNDLE & SAVE
Original price was: $79.99.$71.99Current price is: $71.99.
Original price was: $39.00.$35.10Current price is: $35.10.
Interest free for up to 6 months with 
LEARN MORE
Total: $36.00
Interest free for up to 6 months with 
learn more
Hd Recovery Bag Only
· Mesh internal pockets for separated storage options
· Tie down loops for shackle retention
· Large opening for easy access
· Reinforced handles and bag sides
· Padded carry handle
· High quality zip
Click here for more information
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 37 × 27 × 11 cm |
Related products
-
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points Toyota Prado 150 Series, FJ Cruiser (RPPRA150)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Toyota Prado 150/155 Series 2009 – on
- Toyota FJ Cruiser 2010 – 2018
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
(0 reviews) -
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points Nissan Patrol Y62 Series (RPPAT62)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Nissan Patrol Y62 2010 – On
- Excludes Series 5 TIL Models
- Suits ARB bullbar & Factory bumper
- Opposite Lock bullbar brackets require modifications –
- Will not suit TJM bullbar
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
(0 reviews) - Nissan Patrol Y62 2010 – On
-
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points NAVARA D40 (RPNAV40)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Nissan Navara D40 2005 – 2015
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
(0 reviews) -
4x4 Accessories
Blackhawk Orbiit Winch Pulley Ring (BH-TO-R)
Blackhawk Orbiit Winch Pulley Ring
Blackhawk is announcing the innovative newly designed Orbiit Winch Pulley Ring!
- 4WD innovative, rebuildable design with a low friction internal bearing for improved rope contact surface longevity, operational efficiency, and reduced heat generation.
- International product patents and design registrations.
- Anodised finish with bearing designed to mitigate heat generation.
- Designed for use with both bow & soft shackles.
- Designed, engineered and tested in Australia.
Features & Benefits
- Bearing type design mitigates heat generation
- Anodised alloy finish for reduced friction
- Designed for use with synthetic winch ropes, soft shackles & steel bow shackles
- Patented annulus for locating within recovery system
- Replaces the heavy snatch block and increases the safety of your recovery system.
- Manufactured from premium materials including 7075 Alloy & 4140 Chromoly steel Internal core design ensures soft shackle compatibility and positive location of the winch ring within recovery system.
- The outside ring has a deep rope channel for improved line retention when not under load.
- Includes bearing for pulley efficiency compared to traditional winch ring type products further reducing effort required. This efficiency significantly increases the life of the pulley’s anodised coating, which the rope runs over. Resulting in increased longevity of the pulley surface and lifespan of winch rope used.
Minimum Breaking Strength 21,000kgs Working Load Limit 10,500kgs
(0 reviews)
FIND A STOCKIST IN YOUR AREA
- free delivery OVER $100* *Conditions Apply to heavier items
- easy returns 30 days for free returns
- comfort payments Buy now, Pay later and credit cards available
Direction-Plus™ is a brand of the
Specialist Wholesalers Pty Ltd.
ABN: 64 163 280 279
We accept:
Quick links
Information
help & support
get in touch
- sales@directionplus.com.au
- Melbourne, VIC, Australia
- 1800 037 587
