Roadsafe Rated Recovery Tow Points Toyota Hilux N70 (RPHIL05V2)

Related products

• 

  NEW!

  • 
  • 

  Add to WishlistAdd to Compare

  Rated Recovery Tow Points

  Roadsafe Rated Recovery Tow Points Toyota Prado 150 Series, FJ Cruiser (RPPRA150)

  Roadsafe Rated Recovery Tow Points for Toyota Prado 150/155 Series and FJ Cruiser

  Enhance your off-road recovery capabilities with Roadsafe’s Rated Recovery Tow Points, specifically designed for:

  • Toyota Prado 150/155 Series (2009 – present)

  • Toyota FJ Cruiser (2010 – 2018)

  These high-quality recovery points offer superior strength and reliability for your 4WD adventures.

  Key Features:

  • FEA Tested during design and Destruction tested during development

  • Supplied as matched pairs (LH/RH) for vehicle-specific fitment

  • Includes high tensile bolts and vehicle-specific mounting hardware

  • Optimized Working Load Limit (WLL) when properly installed

  Installation and Usage:

  1. Professional installation recommended by a qualified mechanic with 4WD expertise

  2. Follow provided vehicle-specific instructions for correct installation

  3. Always use as a matched pair with an equalising bridle

  4. Never use a single point with a side load/pull to prevent fatigue and bending

  Important Considerations:

  • Designed for vehicles without bull bars, but can often be adapted

  • May require modifications or additional hardware for bull bar fitments

  • Rated for straight-line pulls and up to 30-degree off-centreline pulls

  • Not tested or intended for lifting purposes

  Compatibility and Fitment:

  • Compatible with various bull bars, including some models from ARB, Opposite Lock, and Genuine Toyota

  • Some bull bars may require modifications or longer bolts for fitment

  • Use grade 8.8 or higher bolts, tightened to appropriate torque specs

  Safety and Performance:

  • Designed to provide reliable recovery capabilities

  • Made from high-quality materials for durability

  • Powder coated for high visibility

  Roadsafe Rated Recovery Tow Points offer a reliable and safe solution for your Toyota Prado 150/155 Series or FJ Cruiser’s recovery needs. By following the provided instructions and using them correctly, you can ensure optimal performance and safety during off-road recoveries. Remember, always prioritize safety and use recovery equipment responsibly.

  Click here for more information

  (0 reviews)

  $174.00 Add to cart
• 

  NEW!

  • 
  • 

  Add to WishlistAdd to Compare

  Rated Recovery Tow Points

  Roadsafe Rated Recovery Tow Points PX RANGER / EVEREST / BT-50 (RPRAN02)

  ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!

  This kit fits:

  • Ford Everest 2015 – 2022
  • Ford Ranger 2011 – 2022
  • Mazda BT-50 2011 – 2021

  Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.

  Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.

  Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.

  Click here for more information

  (0 reviews)

  $462.00 Add to cart
• 

  NEW!

  • 
  • 

  Add to WishlistAdd to Compare

  Rated Recovery Tow Points

  Roadsafe Rated Recovery Tow Points Triton MQ/MR & Pajero Sport QE/QF (RPTRI03)

  ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!

  This kit fits:

  • Mitsubishi Triton MQ/MR 2015 – 2024
  • Mitsubishi Pajero Sport QE/QF 2015 – 2024

  Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.

  Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.

  Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.

  Click here for more information

  (0 reviews)

  $490.00 Add to cart
• 

  NEW!

  • 
  • 

  Add to WishlistAdd to Compare

  4x4 Accessories

  Roadsafe Rated Recovery Tow Points NEXT GEN RANGER/ EVEREST/ BT-50 (RPRAN03)

  ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!

  This kit fits:

  • Ford Next Gen Everest 2022-On
  • Ford Next Gen Ranger 2022-On
  • VW Next Gen Amarok NF 2023-On

  Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.

  Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.

  Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.

  Click here for more information

  (0 reviews)

  $525.00 Add to cart