- sales@directionplus.com.au
- Melbourne, VIC, Australia
- 1800 037 587
PRODUCT SEARCH
Roadsafe Standard Alloy Fairlead (SB627)
This item: Roadsafe Standard Alloy Fairlead (SB627)
$69.00
$69.00
BUNDLE & SAVE
Original price was: $79.99.$71.99Current price is: $71.99.
Original price was: $39.00.$35.10Current price is: $35.10.
Interest free for up to 6 months with 
LEARN MORE
Total: $69.00
Interest free for up to 6 months with 
learn more
Standard Alloy Fairlead
Designed to suit synthetic winch rope, the Roadsafe Alloy Hawse Fairleads aid in directing winch rope on/off the winch via a smooth ‘mouth’ to avoid sharp edges found on the bull bar.
Click here for more information
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 37 × 27 × 11 cm |
Related products
-
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points Navara NP300/D23 (RPNAV23)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Nissan Navara NP300/D23 2015 – on
- Also fits ARB & Ironman Bullbars
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
(0 reviews) - Nissan Navara NP300/D23 2015 – on
-
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points NAVARA D22 (RPNAV22)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Nissan Navara D22 2002 – 2015
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
(0 reviews) -
Rated Recovery Tow Points
Roadsafe Rated Recovery Tow Points PJ-PK RANGER / BT-50 (RPRAN01)
ALWAYS DEMAND GENUINE ROADSAFE RATED RECOVERY TOW POINTS!
This kit fits:
- Ford Ranger 2007 – 2011
- Mazda BT-50 2007 – 2011
Roadsafe Rated Recovery Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits. Rated Recovery Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts and any additional vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for your and others personal safety. Each pair of Rated Recovery Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. Rated Recovery Points fitting instructions can be found here.
Always use Rated Recovery Points as a matched pair with an equalising bridle. Failure to use Rated Recovery Points correctly can result in Rated Recovery Points fatigue and bending and voiding your warranty. Never use a single point combined with a side load/pull. The Rated Recovery Points are easy to install. It is recommended that Rated Recovery Points are fitted by a qualified mechanic with specialist 4WD knowledge who understands your vehicle, including weights carried, the style of Bull Bar, general usage, etc. In some circumstances, these Rated Recovery Points may not be suitable for your vehicle. Incorrect selection or incorrect installation is not covered by warranty.
Rated Recovery Points have been designed on vehicles without Bull Bars. In some circumstances, the bull bar mounting bolts/brackets may utilise the same chassis holes that are utilised for Rated Recovery Point fitment. Most of the time, there is a fix around this – however, in some instances where Bull Bars have been fitted, it precludes the opportunity to fit the Rated Recovery Points without major modifications. Where possible, we maintain a list of Bull Bar fitments which can be found here. Additionally, if a bull bar is fitted, modifications might be required to the bar bracket, and additional hardware might be required (longer bolts etc.) To facilitate fitment. As there are so many combinations and potential bar model combinations, we are unable to include every potential bolt required in the kit – this would make the kits ridiculously expensive. We have supplied the kits with the bolt options identified to suit the majority of applications. Unfortunately, if your vehicle/bar/Rated Recovery Point combination falls outside of those applications, you will have to purchase additional bolts (from a local bolt barn or similar) to suit your required application. We recommend grade 8.8 or higher and tightening to appropriate bolt torque specs. It is the Rated Recovery Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owner’s discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application. These Rated Recovery Points have been designed and tested for straight-line pulls and in some cases, a 30 degree off centreline pull. The Rated Recovery Points have not been tested for lifting purposes and should not be used for lifting. The forces applied to differ between lifting and straight-line pull-type recoveries.
https://roadsafe.com.au/products/rated-recovery-tow-point-ford-compatible/rpran01
(0 reviews) -
4x4 Accessories
Roadsafe Soft Shackle 10mm 9000kg with Bonus Drying Bag (SB039)
Soft Shackle – Grey Orange Sheath – Bonus Drying Bag
Roadsafe offers a great range of Recovery Straps, each individually designed to suit its purpose so that you can have the right strap for the right application. The Roadsafe Recovery Straps are tested to certified standards, fully stamped and tagged rated, come with complete sewn eyes and protective sleeves.
Roadsafe Soft Shackles are designed to be a safe, lightweight, easy to use alternative to conventional steel bow shackles. Manufactured from UHMWPE 10mm 12 synthetic plait rope, the Roadsafe Soft Shackles are supplied complete with high visibility abrasion-resistant sheath and pre-tensioned for immediate use.
By using a Roadsafe Soft Shackle, you effectively remove a very heavy and potentially lethal standard steel shackle from your recovery system. Being manufactured from the rope, the Roadsafe Soft Shackle floats, so no more lost shackles or pins in muddy, watery environments during recovery, and is flexible, so suitable for a huge variety of applications.
- Rope Spliced Breaking Strain 10mm – 9000kgs
- Maximum strength to weight ratio and strength comparable to steel
- Lowest elongation, minimal stretch
- Lightweight for gross weight reduction
- Time saver takes less time to set up than a conventional shackle
- Floats in water and muddy environments
- Abrasion-resistant sheaths for maximum durability
- Rope Spliced Breaking Strain 9000kgs Soft Shackle – Grey Orange Sheath – Bonus Drying Bag
(0 reviews)
FIND A STOCKIST IN YOUR AREA
- free delivery OVER $100* *Conditions Apply to heavier items
- easy returns 30 days for free returns
- comfort payments Buy now, Pay later and credit cards available
Direction-Plus™ is a brand of the
Specialist Wholesalers Pty Ltd.
ABN: 64 163 280 279
We accept:
Quick links
Information
help & support
get in touch
- sales@directionplus.com.au
- Melbourne, VIC, Australia
- 1800 037 587
